New Year's decor is an integral part of the festive decoration. Complement it with beautiful covers for cutlery, made in the same style.
![](http://img.ballardsicecream.com/img/burd-2020/3832/dekor-novogodnego-stola-chehol-dlyastolovih-priborov.jpeg)
It is best to sew covers for cutlery from a fabric that is resistant to repeated washing, this will allow them to be used for a long time.
You will need:
![](http://img.ballardsicecream.com/img/burd-2020/3832/dekor-novogodnego-stola-chehol-dlyastolovih-priborov-2.jpeg)
✂ metallic fabric for the outside
✂ mint fabric for the inside
✂ slanting inlay
✂ sewing thread
✂ tailor pins
✂ scissors
✂ ruler
✂ centimeter tape
✂ tailor's chalk
✂ ruler for patchwork
DIY holiday table decor
Part size - 66 x 12 cm.
The length of the lower part is 18 cm, the middle part is 25 cm, the upper part is 23 cm. Seam allowances are 1 cm.
The finished product is 10 cm wide.
Recommended fabrics: cotton and linen.
Step 1
![](http://img.ballardsicecream.com/img/burd-2020/3832/dekor-novogodnego-stola-chehol-dlyastolovih-priborov-4.jpeg)
From both fabrics, cut out the outer and inner parts of the cover with allowances for seams 1 cm wide along the upper and side sections. There are no allowances for the lower cuts of parts.
Step 2
![](http://img.ballardsicecream.com/img/burd-2020/3832/dekor-novogodnego-stola-chehol-dlyastolovih-priborov-5.jpeg)
Fold both parts with their faces to each other and grind the side and upper sections at a distance of 1 cm. Cut the seam allowances at the corners diagonally.
Step 3
![](http://img.ballardsicecream.com/img/burd-2020/3832/dekor-novogodnego-stola-chehol-dlyastolovih-priborov-6.jpeg)
Unscrew the blank of the cover, pin the oblique inlay along the lower cut, tucking its slices.
Step 4
![](http://img.ballardsicecream.com/img/burd-2020/3832/dekor-novogodnego-stola-chehol-dlyastolovih-priborov-7.jpeg)
To sew a slanting inlay to the edge, having connected the ends.
Step 5
![](http://img.ballardsicecream.com/img/burd-2020/3832/dekor-novogodnego-stola-chehol-dlyastolovih-priborov-8.jpeg)
Unscrew the lower part of the workpiece upwards by 18 cm and pin it.
Provence Cutlery Covers
Step 6
![](http://img.ballardsicecream.com/img/burd-2020/3832/dekor-novogodnego-stola-chehol-dlyastolovih-priborov-10.jpeg)
Stitch the cover along the contour, connecting the sides.