Insert the zipper into the side seam of the trousers

Send

If you like the style of bikers, then sew in a 1 G pants from the magazine “Sewing fast and easy” 01/2014 zipper - determine the length of the zipper to your taste.

In addition, we offer several cult things for a finished look: a loose blouse with a polo clasp, dark glasses and, of course, leather accessories - a belt with metal rivets, high boots with lacing and thick soles and rocker mitts.

It’s not difficult to sew zippers into the side seam of your trousers. It is done like this.

YOU WILL NEED Two metal zippers (16 cm), gasket, sewing thread, scissors, geometric triangle, "magic" crayon.
STEP 1 Above and below the knee mark, draw 6 lines at intervals of 7 mm.
STEP 2 Cut the gasket with allowances and place. For marking, lay the stitches with thick threads. Cut off the gasket allowances.
STEP 3 On each side, grind the side sections, not reaching 16 cm to the bottom. Sew an oblique trim from the pocket to the slit for the zipper. Stitch the zipper openly.

Strap: Cheap Monday. Points: Police Vintage. Polo shirt: BURDA 7/2010, model 130. Gloves: Karl Lagerfeld. Boots: Bronx.
PHOTO: JANSHIMIDEL (4); U2 / ULI GLAZEMAN (3); PR ILLUSTRATIONS: BERNADETTE PREMTL. STATEMENT: MONICA KIRSH.
The material was prepared by Elena Karpova.

Send